VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 8)

3 Product description
3.1 Configuration
The VEGAPULS 62 radar sensor is available in two electronics
versions:
l Standard electronics type PS60KF
l Electronics with increased sensitivity type PS60KL
The respective version can be determined by means of the type label
on the electronics.
The electronics version influences the CE conformity, the factory
setting for the medium selection and vessel form, the accuracy as well
as the approvals of VEGAPULS 62. The differences are listed in the
respective sections of this operating instructions manual.
The scope of delivery encompasses:
l VEGAPULS 62 radar sensor
l Documentation
-
this operating instructions manual
-
Operating instructions manual 27835 "Indicating and adjust-
ment module PLICSCOM" (optional)
-
Supplementary instructions manual 31708 "Heating for in-
dicating and adjustment module" (optional)
-
Supplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
-
Ex-specific "Safety instructions" (with Ex-versions)
-
if necessary, further certificates
VEGAPULS 62 consists of the following components:
l Horn or parabolic antenna
l process fitting (depending on the version flange or thread)
l optionally available with purging air connection, reflux valve
l Housing with electronics, optionally available with plug connector,
optionally available with connection cable
l Housing cover, optionally available with indicating and adjustment
module PLICSCOM
The components are available in different versions.
Versions
Scope of delivery
Components
8 VEGAPULS 62 • Foundation Fieldbus
3 Product description
28450
-EN
-090305