VEGA VEGASON series 60 Electronics module - Manual (Page 13)

5 C onnecting to power supply
5 .1 Preparing the connection
Warning:
Before connecting to voltage supply, the plug connection
between transducer and remote electronics must be provided
in idle condition (see operating instructions manual of the
respective sensor). Non-observance will damage the elec-
tronics!
Only then, the sensor may be connected to voltage supply.
5 .2 Connection procedure
The connection to voltage supply is carried out according to
the operating instructions manual of the respective sensor.
Electronics module - VEGASON series 60 13
Connecting to power supply
30206
-
EN
-070510