4 mounting procedure, two–wire instruments, 4 mounting procedure, two-wire instruments – VEGA VEGASON series 60 Electronics module User Manual
Page 9
l
SN-E.64VD (D = with approval CX, UX, UF according to
VEGA product list)
l
SN-E.64VG (G = with approval GX according to VEGA
product list)
Electronics module SN-E.64F suitable for VEGASON 64, 65,
66 - Foundation Fieldbus:
l
SN-E.64FX (X = without approvals)
l
SN-E.64VD (D = with approval CX, UX, UF according to
VEGA product list)
l
SN-E.64VG (G = with approval GX according to VEGA
product list)
4
.4 Mounting procedure, two-wire instruments
The electronics module is located in the electronics compart-
ment. The below illustrations show the respective position of
the electronics compartment in a single or double chamber
housing.
1
Fig. 1: Single chamber housing
1
Position of the electronics compartment
1
Fig. 2: Double chamber housing
1
Position of the electronics compartment
Proceed as follows:
1
Switch off power supply
2
Unscrew housing cover of the electronics compartment
Foundation Fieldbus
Mounting steps
Electronics module - VEGASON series 60
9
Mounting
30206
-
EN
-070510