VEGA VEGASON series 60 Electronics module - Manual (Page 16)

The Service-DTM confirms the successful input of the current
values and indicates the actual current value. This value
corresponds to the actual measured value taking the calibra-
tion into account.
As a rule, all settings already carried out on site with the
previous electronics module such as min./max. adjustment,
false echo fade-out etc., must be repeated.
Tip:
For this purpose, use the copy function of the indicating and
adjustment module or the adjustment software PACTware™.
Adjustment
16 Electronics module - VEGASON series 60
Setup
30206
-EN
-070510