VEGA VEGAFLEX 67 (-200…+400°C) Profibus PA - Manual (Page 30)

Function Reset value
Max. adjustment Distance, upper dead zone
Min. adjustment Distance, supplied sensor length
Min. adjustment - Cable version Distance, lower dead zone
Damping ti 0 s
Linearisation Linear
Sensor-TAG Sensor
Display PA-Out 1
Channel (PV) lin %
Additional PA value (PV) lin %
Out-Scale-Unit %
PV-Out-Scale 0.00 lin % = 0.0 %
100.0 lin % = 100 %
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function Reset value
Sensor address No reset
Language No reset
Factory setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
3)
Peak value
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
3) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
30 VEGAFLEX 67 • Profibus PA
6 Set up with the indicating and adjustment module PLICSCOM
32313
-EN
-120329