VEGA PLICSRADIO T61 Wireless emitting unit - Manual (Page 19)

19
6 Set up with the display and adjustment module
PLICSRADIO T61 • Wireless emitting unit (single channel)
32865-EN-130322
6 Set up with the display and adjustment
module
6.1 Short description
The display and adjustment module is used for measured value indi-
cation, adjustment, and diagnostics. It can be used in all instruments
of the plics ® series:
Note:
You can find detailed information on the adjustment in the operating
instructions manual "Display and adjustment module".
6.2 Insert display and adjustment module
The display and adjustment module can be inserted into the instru-
ment and removed again at any time. It is not necessary to interrupt
the power supply.
Proceed as follows:
1. Unscrew the housing cover
2. Place the display and adjustment module in the desired position
on the electronics (you can choose any one of four different posi-
tions - each displaced by 90°)
3. Press the display and adjustment module onto the electronics
and turn it to the right until it snaps in.
4. Screw housing cover with inspection window tightly back on
Removal is carried out in reverse order.
The display and adjustment module is powered by PLICSRADIO T61,
an additional connection is not necessary.
Function/Configuration
Mount/Dismount display
and adjustment module