VEGA PLICSRADIO T61 Wireless emitting unit - Manual (Page 32)

32
10 Supplement
PLICSRADIO T61 • Wireless emitting unit (single channel)
32865-EN-130322
10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435, 316Ti corresponds to 1.4571
Material
Ʋ Housing plastic PBT, Alu die-casting, 316L
Ʋ Inspection window in housing cover
for display and adjustment module
Polycarbonate (UL-746-C listed)
Ʋ Ground terminal 316Ti/316L
Weight
Ʋ Plastic housing 840 g (1.851 lbs)
Ʋ Aluminium housing 1300 g (2.866 lbs)
Voltage supply
Operating voltage depending on the version of the power supply unit
Ʋ 24 V version 9.6 … 48 V DC, 24 … 42 V AC
Ʋ 115/230 V version 90 … 253 V AC, 50/60 Hz
Max. power consumption depending on the type of power supply unit
Ʋ 24 V version 5.3 VA; 3.5 W
Ʋ 115/230 V version 5 VA; 2.4 W
HART sensor input
Number of sensors
1 x HART sensor
Type of input (selectable)
Ʋ Active input Sensor is powered by PLICSRADIO T61
Ʋ Passive input Sensor has an own power supply
Measured value transmission
Ʋ digital HART protocol
Terminal voltage 18 … 14.5 V at 4 … 20 mA
Current limitation 25 mA
Connection cable to the sensor two-wire screened standard cable
Radio transmission
Radio frequency
Ʋ Standard version 2450.15 … 2459.75 MHz
Ʋ Version increased range 2) 920 … 927.2 MHz
Antenna connection R-SMA
Antenna type, standard Isotropic (Omni) antenna
Emitted power, standard antenna
Ʋ Standard version 15 dBm (32 mW)
Ʋ Version increased range 19 dBm (80 mW)
2) Only permitted in USA/Canada