VEGA VEGABAR 66 Profibus PA - Manual (Page 41)

41
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 66 • Profibus PA
36739-EN-130321
Menu section Function Reset value
Damping 0 s
Linearization Linear
Sensor-TAG Sensor
Display Displayed value PA-Out
Service Additional PA value Secondary Value 1
Out-Scale-Unit Volume/l
Scaling 0.00 to 100.0
Decimal point indication 8888.8
The values of the following menu items are not reset with "Reset:
Menu section Function Reset value
Basic settings Unit of measurement No reset
Temperature unit No reset
Position correction No reset
Display Backlight No reset
Service Language No reset
Application No reset
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values. 8)
Peak value
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
6.5 Menu schematic
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Optional settings
8) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.