VEGA PROTRAC series 30 Electronics module - Manual (Page 17)

17
4 Mounting
Electronics module • PROTRAC series 30
40104-EN-130916
Note:
If the photomultiplier was exposed to strong light, this can temporarily
cause measurement deviations. Therefore, as a rule, wait two hours
before you put the instrument into operation.
The electronics exchange is now finished.
As a rule, an exchange of electronics must be documented internally
if SIL qualified instruments are involved.
As a rule, an exchange of electronics must be documented internally
if Ex applications are involved.
Information:
The old electronics module is not contaminated and can be disposed
of as electronic scrap.