VEGA PROTRAC series 30 Electronics module - Manual (Page 5)

5
3 Product description
Electronics module • PROTRAC series 30
40104-EN-130916
3 Product description
3.1 Configuration
This operating instructions manual applies to the electronics modules
of the sensors from the PROTRAC series.
•
FIBERTRAC
•
SOLITRAC
•
POINTRAC
•
MINITRAC
•
WEIGHTRAC
The scope of delivery encompasses:
•
Electronics module
•
Optical pad
•
Plastic spatula
•
Special grease for optical pad (tube 5 ml)
•
Coding pins (2x)
•
Documentation
– this operating instructions manual
3.2 Principle of operation
The electronics module is suitable as a replacement in sensors of
series PROTRAC. You can find the available versions in chapter
"Mounting preparations".
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
Scope of this operating
instructions manual
Scope of delivery
Application area
Packaging
Transport
Transport inspection
Storage