VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard User Manual
Page 78
Advertising
The function block "Signal Characterizer" has two channels the outputs of which are not in linear
relation with the respective input. The non-linear relation is defined by a look-up table with individually
selectable x/y-pairs. The respective input signal is imaged on the corresponding output, hence this
function block can be used in a control loop or signal path. Optionally the function axis can be
exchanged in channel 2 so that the block can be also used in a reverse control loop.
Fig. 56: Schematic presentation function block Signal Characterizer
Function block Integrator
78
VEGAPULS
61 • Approval according to LPR radio standard
11 Supplement
41716
-EN
-120301
Advertising