VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus Approval according to LPR radio standard - Manual (Page 84)

FF desciptor Description Unit
USER_MIN_MAX_PHYSI-
CAL_VALUE Min.-/max.- distance values, date
RESET_PEAK_PHYSICAL_-
VALUE
RESET_LINEARIZATION_-
CURVE
DEVICE_STATUS_ASCII Device status
ECHO_CURVE_PLICSCOM_-
REQUEST Parameters as curve selection and resolution
ECHO_CURVE_PLICSCOM_-
LIMITS Parameters as start and end
APPROVAL_WHG Sensor acc. to WHG
DEVICE_STATE_CONFIG Function check, maintenance required, out of specification
ELECTRONIC_TEMPERATU-
RE Electronics temperature
RESET_PEAK_ELECTRO-
NIC_TEMP
FOCUS_RANGE_CONFIG Width focusing range, time for opening the focusing range, min.
measurement reliability in and outside the focusing range
NOISE_DETECTION_INFO Increase of the system noise
NOISE_DETECTION_CON-
FIG System noise treatment
ECHO_MEM_SAVE_CUR-
VE_TYPE
ECHO_MEM_STATE Busy, curve type, error code
84 VEGAPULS 61 • Approval according to LPR radio standard
11 Supplement
41716
-EN
-120301