2 adjustment elements – VEGA VEGASWING 66 - two-wire With SIL qualification User Manual
Page 22
22
6 Setup
VEGASWING 66 • - two-wire
44952-EN-130805
6.2 Adjustment elements
4
1
5
3
2
6
Z
Fig. 14: Electronics module - Two-wire output
1 Signal lamp - red (LED)
2 Signal lamp - yellow (LED)
3 Signal lamp - green (LED)
4 DIL switch for mode adjustment
5 DIL switch for sensitivity adjustment
6 Test key
The instrument monitors the vibrating frequency, electronics tempera-
ture and internal instrument functions.
•
Red LED lights = fault
•
Reaktion on the output
Control lamp for indication of the switching status
With the mode setting (4), the switching condition and hence the
function of the signal lamp can be changed.
•
Yellow LED lights = 8 mA
•
Yellow LED off = 16 mA
•
Green LED lights = operating voltage on
Control lamp (1) - fault
indication (red)
Signal lamp (2) - Switch-
ing condition (yellow)
Signal lamp (3) - Operat-
ing condition (green)