VEGA MoRoS Modem - ISDN 1.3 - Manual (Page 58)

Functions MoRoS Modem - ISDN 1.3
58
12.11.3 Setting the Time and the Time Zone
The MoRoS Modem - ISDN 1.3 has an internal clock to control time-controlled events.
This clock must be set to ensure that time-controlled events are processed precisely to
the desired time, and that system messages are dated correctly.
Configuration with the web interface
To set the time and the date, enter the values for day, month, year, hour and
minutes in the entry fields "DD MM YYYY hh mm" (Figure 23, page 41 above,
position 3).
Select your Time zone and activate automatic daylight-saving as an option.
Save the settings by clicking "OK" (Figure 23, page 41 above, position 1).
12.11.4 Synchronizing the Time via the NTP Server
The clock of the MoRoS Modem - ISDN 1.3 can be updated automatically via an NTP
server from the Internet. During each connection setup, the MoRoS Modem - ISDN 1.3
will attempt to synchronize the time from the specified NTP server. In contrast to the
time, the time zone must be manually adjusted to the location of the MoRoS Modem -
ISDN 1.3.
Configuration with the web interface
To synchronize the time and the date via NTP server, activate the checkbox
"Time synchronization via" and enter the name of an NTP server or its IP ad-
dress in the entry field (Figure 23, page 41 above, position 2).
Set up the time zone of the location of the MoRoS Modem - ISDN 1.3, by se-
lecting it from the dropdown menu "Time zone" (Figure 23, page 41 above,
position 4).
Save the settings by clicking "OK" (Figure 23, page 41 above, position 1).
12.11.5 Reset
You can reset the MoRoS Modem - ISDN 1.3 via the web interface or by pressing the reset
key on the front of the device. You can simply restart your device or reset all settings to
the factory defaults. Use the reset key to trigger a restart of the MoRoS Modem - ISDN
1.3 by pressing it once, at a minimum for three seconds. Pressing the reset key three
times for a short time within two seconds loads the factory defaults of the MoRoS Mo-
dem - ISDN 1.3.
Configuration with the web interface
To restart the MoRoS Modem - ISDN 1.3, use the radio buttons "Restart"" in
the menu "System" on the page "Reset" (Figure 24, page 41 above, position 2).
Click on OK (Figure 24, page 41 above, position 1) to perform the restart.
To restart the MoRoS Modem - ISDN 1.3 and to reload the factory defaults at
the same time , use the radio buttons "Load basic settings and restart"" in the