Velleman VDPC148 - Manual (Page 4)

VDPC148 VELLEMAN 4
• Never remove the cover. There are no user serviceable parts inside.
• This unit is not intended for home use.
• Keep the device away from children and unauthorised users.
• Do not operate this unit in places with excessive humidity and with temperatures over 45°C/113°F and under
2°C/35.6°F
3. General Guidelines
• All modifications of the device are forbidden for safety reasons. All user modifications will void the warranty.
• In the unlikely event that the device needs service, contact your dealer.
4. Controls and Functions
a) Front panel (fig 1)
1. Preset A LEDs
Show the current intensity of the corresponding channels 1 to 24.
2. Channel sliders 1-24
These 24 sliders are used to control and/or program the intensity of channels 1-24.
3. Flash buttons 1-24
These 24 buttons are used to bring an individual channel to full intensity.
4. Preset B LEDs
Show the current intensity of the corresponding channels 25-48
5. Scene LEDs
Light when relevant scenes are active.
6. Channel sliders 25-48
These 24 sliders are used to control and/or program the intensity of channels 25-48.
7. Flash buttons 25-48
These 24 buttons are used to bring an individual channel to full intensity. They are also used for programming.
8. Dark button
This button is used to momentarily black out overall output.
9. Down/Beat Rev-
Use the down buttons to modify a scene in Edit Mode, BEAT REV is used to reverse the chase direction of a
program with regular beat.
10. Mode select / Rec. Speed-
Each tap will activate the operating mode in the following order: CHAS/SCENES, double preset and single preset.
Rec speed; set the speed of any of the programs in mix mode.
11. Up/Chase Rev-
Up is used to modify a scene in Edit Mode. Chase Rev is to reverse the chasing, direction of a scene under speed
slider control.