Velleman VDPC148 - Manual (Page 5)

VDPC148 VELLEMAN 5
12. Page button
Tap to select pages of scenes from page 1-4.
13. Delete/Rev One-
Deletes any step of a scene or reverses the chase direction of any program.
14. Segment Display-
Shows the current activity or programming state.
15. Insert % or 0-255
Insert is used to add one step or steps into a scene. % or 0-255 is used to change display value cycle between %
0-255.
16. Edit/All Rev-
Edit is used to activate Edit Mode. All Rev is to reverse the chase direction of all programs.
17. Add or Kill/Rec Exit-
In Add mode, multiple scenes or flash buttons will be on at the same time. In kill mode, pressing any flash button
will kill any other scenes or programs. Rec exit is used to exit from program or edit mode.
18. Record/Shift-
Record is used to activate the record mode or to program a step. Shift functions are only used with other buttons.
19. Master A button-
Brings channel 1-12 to full setting.
20. Park button-
Used to select single mix chase, bring channel 12-34 into full setting, or momentarily program a scene into the
Master B slider, depending on the current mode.
21. Hold button
This button is used to maintain the current scene.
22. Step button
This button is used to go to the next step when the speed slider is pushed to the bottom or when in edit mode.
23. Audio button-
Activates audio sync of chase and audio intensity effects.
24. Master Slider A-
This slider controls the overall output of all channels.
25. Master Slider B
This slider controls the chase of all channels.
26. Blind button
This function takes the channel out of the chase of a program in the CHNS/SCENE MODE.
27. Home button
This button is used to deactivate the blind.
28. Tap Sync button
Repeatedly pressing this button establishes the chase speed.
29. Full On button
This function brings the overall output to full intensity.
30. Black Out button
This button is used to kill all outputs with the exception of Flash and Full On
31. Fade Time slider
Used to adjust the fade time.
32. Speed Slider
Used to adjust the chase speed.
33. Audo Level Slider
This slider controls the sensitivity of the audio input.