Velleman HAA2866 User Manual
Page 13
KEYPAD PROGRAMMING MAKE SIMPLE – For General Users
The HAA2866 is a multi purpose keypad. It has many functions for user’s selection. For those general
users taking the keypad for door strike only, most of the features can be kept in their Default values.
Only the User PINs / Cards and a private Master Code are necessary to program for the system.
The keypad accepts 1) Card only, 2) PIN only, 3) Card + PIN or 4) Card + Common User Code to
operate its outputs.
PROGRAMMING
NOTE: Wait 1 minute until the end of the power up delay.
1) Set System into Programming Mode with The Factory Set Master Code 0 0 0 0
---- 2 beeps, system is in Programming Mode
Note: If the Master Code is forgotten, use the DAP Code to set the system into programming mode.
See DAP CODE 8080 on the previous page for the details.
2) Change The Factory Set Master Code to Owner’s Private Master Code for Security Reason
---- 2 beeps, 3 2 8 9 is a Master Code for example here only
3289 is the new Master Code and the 0000 is erased
3) Record an “EM Card” to Operate The Output 1 for Door Open
(a)
(b) (c) (d)
(e)
(a) 10 = Programming Location for Output 1
(b) 1 = Programming option for EM Card only
(c) 001 = One of the 1,000 User IDs for the User PIN/Card from 000-999
(d) Read Card = Put the Card close to the card reader
(e) # = Confirm the card is read, 2 beeps
4) Set an “User PIN” to Operate The Output 1 for Door Open
(a)
(b) (c) (d) (e)
(a)
(b)
(c)
(d)
(e)
5) Record an “EM Card + User PIN” to Operate The Output 1 for Door Open
10
3
003
6123
#
(a) (b) (c) (d) (e) (f )
(a)
(b)
(c)
(d)
(e)
(f )
0000
**
01
3289
#
10
2
002
8321
#
10
1
001
#
READ CARD
READ CARD
12
10 = Programming Location for Output 1
2 = Programming option for User PIN only
002 = One of the 1,000 User IDs for the User PIN/Card from 000-999
8321 = The User PIN that is programmed for door open. 8321 is an User PIN for example here
only
# = Confirm the User PIN, 2 beeps
10 = Programming Location for Output 1
3 = Programming option for EM Card + User PIN. (The User PIN can be repeated use or
proprietary)
003 = One of the 1,000 User IDs for the User PIN/Card from 000-999
Read Card = Put the Card close to the card reader
6123 = The User PIN to be used with the EM Card. 6123 is an User PIN for example here only
# = Confirm the Card+PIN is stored, 2 beeps