Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1793 - Manual (Page 5)

PNEG-1793 Page 5 of 8
Distributor Pipe Control - Farm/Commercial
6. Attach the inner mount pipe control bracket (DPC0005) to the trunking using two (2) 3/8" x 1"
HHCS bolts (S-7469) and two (2) 3/8" large flange nuts (S-968), as shown in Figure 5 .
7. Attach the control pipe to the intermediate guides with a 1/4" x 1-3/4" x 3" U-bolt (S-10145) and
four (4) 1/4" flange nuts (S-7215). (See Figure 5.)
Figure 5 Intermediate Guide to Trunking