Turbosmart BOOST CONTROLLERS – ELECTRONIC - e-Boost2 (2005-current) – Complete User Manual - Manual (Page 14)

www.TURBOSMARTONLINE.com
14
BASIC OPERATION
The e-boost2 is turned on by switching on your ignition.
Turning off the e-Boost2: The e-Boost2 is turned off by pressing and holding the MODE button for five seconds or turning off your
ignition. If you turn the unit off with you ignition on pressing the MODE button momentarily will turn the unit back on.
Display Mode: Your e-boost2 has a display mode that may be used if showing your car. Pressing the UP and DOWN buttons together
quickly will enter the display mode. “e-boost2” will scroll across the screen and the bar graph will scroll up and down. Pressing the UP
and DOWN buttons together will exit display mode.
Live Mode: When the e-Boost2 is turned on, it automatically goes into live mode and displays the current vacuum/boost.
Boost setup Menu: To enter the boost setup menu, in live mode, press MODE and BOOST/DOWN key ONCE at the same time.
Setup Menu: To enter the setup menu, in live mode, press MODE and SETUP/UP Key ONCE at the same time.
Navigation and adjusting values in menus: Use the UP and DOWN keys to scroll or adjust values up and down.
Entering menus: Press the MODE key ONCE to enter any menu.
Saving settings: When adjusting values, once the desired value is selected, press the MODE key ONCE to save the value.
Exiting menus: When in any menu, HOLDING the MODE key will bring you back to the previous menu without saving the setting
MODE KEY
SETUP/UP KEY
BOOST/DOW N KEY
LIGHT SENSOR
(DO NOT COVER)
DOT INDICATES CURRENT
UNITS
MAIN DISPLAY
BAR GRAPH
DISPLAY
MAIN LOOM PLUG LED ACCESSORY PLUG
PANEL MOUNT BRACKET
4MM HOSE