Turbosmart BOOST CONTROLLERS – ELECTRONIC - e-Boost2 (2005-current) – Complete User Manual - Manual (Page 34)

www.TURBOSMARTONLINE.com
34
MAZDA RX-7 FC3S 13B 88.9 ~91.11
RPM
ECU location: C
NISSAN 180SX RPS13 SR20DET 96.8 ~ 98.12
RPM
ECU location: A
MITSUBISHI GTO Z16A 6G72 90.10 ~ ONWARDS
MITSUBISHI LANCER CE9A 4G63 93.10 ~96.7
& CD9A 4G63 92.10 ~ 93.9
RPM
ECU location:
E
ECU location: B
MITSUBISHI ECLIPSE D32A 4G63 95.6 ~ ONWARDS
MITSUBISHI LANCER CP9A 4G63 99.1 ~ ONWARDS
MITSUBISHI LANCER CP9A 4G63 98.1 ~ 98.12
MITSUBISHI LANCER CN9A 4G63 96.8 ~ 97.12
RPM
ECU location: E
ECU location: B
MITSUBISHI ECLIPSE D27A 4G63 89.11 ~ 95.6
RPM
ECU location: E
Note: For your rpm signal to work correctly with this ECU you may need to place a 3.3K ohm ¼ watt
resistor (Colour code: orange, orange, orange, gold) in series with the yellow rpm input wire before
connecting to the ECU.