Turbosmart BOOST CONTROLLERS – ELECTRONIC - e-Boost2 (2005-current) – Complete User Manual - Manual (Page 31)

www.TURBOSMARTONLINE.com
31
rES (Reset)
This function performs a factory reset and returns all the settings back to factory default.
VEHICLE WIRING DIAGRAMS
Following are vehicle specific ECU wiring diagrams for connecting the yellow RPM signal wire. Turbosmart recommends consulting an
appropriately qualified technician for this installation. Be sure to count the number of pins and securely connect the yellow RPM wire to
the appropriate ECU wire. Be sure to cover any exposed connections with electrical tape.
Each diagram has the ECU locations specified by the key and diagram below.
A Passenger Side Lower
Dash
F Under the driver seat K Right of the centre console
B Left of the glove box
G Under the passenger
seat
L Engine bay
C Passenger Side foot rest H Near the steering column M Front side of the boot
D Behind the glove box I Right of the meter panel N Back of the driver seat
E Behind the centre console
J Driver side lower dash
A
B
C
D
E
F G
H
I
J
K
ECU DIAGRAMS ARE
VIEWED