TC Electronic FireworX - Manual (Page 16)

14
BASIC OPERATION Recall
Exercise 1:
How to Recall a Preset
Press the Recall key
Exercise 1:
How to Recall a Preset
In this Exercise we are going to recall a couple of Presets. Press
the Recall key (if you’re not already there) and select the
“Preset” page using the < > Arrow keys. Make sure that the
“Bank” is set to Factory, and that the “Filter” is off.
Now select the Preset parameter and dial the Value wheel to
scroll through the factory Presets. While scrolling you will see
both the preset number and the LED of the Enter key blinking,
indicating that the current Preset has not been recalled yet.
Select Preset #10 and press Enter to confirm. Preset #10 is now
recalled.
Press the Enter key
to Recall the Preset
Exercise 2:
How to search for Presets containing a specific effect
Press the Recall key
Press the Enter key
to Recall the Preset
Exercise 2:
How to search for Presets containing a specific effect
Now we will try to recall a Preset containing a specific effect, in
this exercise a delay. Select the “Filter” parameter by using the
Parameter wheel.
Dial the Value wheel until you see “DLY”. Now move the cursor
back to the “Preset” parameter.
Dial the Value to scroll through the Presets. Notice that the
FireworX only shows Presets containing the Delay block.
Select a Preset and press Enter to confirm.
Dial Parameter
wheel to select
“Filter”
Dial Value
wheel to
choose “Delay”
Dial Value
wheel to scroll
through
Presets
Dial Parameter
wheel to select
“Preset”
Dial Value wheel
to scroll
through Presets
RECALL
ENTER
RECALL
ENTER