TC Electronic FireworX - Manual (Page 8)

OVERALL BYPASS
The Bypass key in the upper left corner
is the overall bypass. With this key you
can bypass all effects in the FireworX
simultaneously.
ALPHA MOD. SETUP
Press this key to get an overview of the
parameters controlled by the Alpha
Mod. wheel.
TEMPO
Tap the global tempo using the Tempo
key or connect the global tempo to
MIDI clock.
Note: this may affect the current preset.
Pressing the Tempo key will enable the
Tempo pop-up menu. This menu will
disappear after a few seconds.
The Tempo key will indicate the global
tempo by blinking.
GAIN REDUCTION
Reads out the gain reduction of one of
the Dynamics blocks.
LED’s
The three LED’s indicate MIDI activity,
Preset Edited, and Digital lock . The
Digital Lock LED blinking indicates lack
of external clock. POWER
Press and hold the Power
switch for about 3 seconds,
then release to power off.
IN/OUT KNOBS
The overall analog Input level
is adjusted via the knob in the
upper left corner of the
FireworX. The Input should
average approximately -3 to -6
dB on the Input meters.
Set your analog output level
using the Output knob.
CARD SLOT
The PCMCIA slot is used for
storing and loading presets.
Use Type 1 PC Cards with a
minimum 64 KBytes of SRAM.
INPUT METERS
These meters indicate the
level of Left and Right
inputs.
OVERFLOW LED
This LED indicates
internal overflow.
INTRODUCTION The Front Panel
6