TC Electronic FireworX - Manual (Page 17)

15
BASIC OPERATION Store
Quick Store with the same name
If you want to store an edited Factory Preset with the same name, simply press Store and Enter. The FireworX will
automatically store the Preset in the first empty User space.
If you want to store an edited User Preset with the same name, simply press Store and Enter. The FireworX will store
the Preset in the same User Preset position.
The Store display
The FireworX can hold a maximum of 200 User Presets, and up
to 999 additional Presets can be stored on card (depending on the
size of the card). Due to the dynamic Preset structure, the
maximum amount of presets storable in the FireworX will vary
depending on the size of the Presets.
The Store display consists of three different pages: Name - Store
- Delete.
Use the < > Arrow keys to select between them.
The Store page
The Store page displays the Preset name, the User or Card space
that you are about to store in, and the amount of free space in the
internal User bank.
The Bank indicator
The bank indicator tells you which bank and number you are
about to store in. The existing name of the current number is
displayed, if the number is free it will read <EMPTY>.
New Name
The New Name line shows the name the Preset will be stored
with. This name can be changed on the Name page.
Free space indicator
The Free space indicator tells you how much room there is left in
the FireworX internal RAM bank. The FireworX can hold a
maximum of 200 User Presets, however the actual number
depends on the size of your Presets and may be less than 200.
This is due to the dynamic Preset memory structure of the
FireworX.
The Name Page
In the Name page you can change the name of your Preset and
change the text describing the function of the Alpha Mod. wheel.
The Letterbox
Use the Parameter wheel to change cursor position. Dial the
Value wheel and press Enter to select new letters or numbers. To
switch to capital letters and between numbers and special
charaters, press the Exit key or select CAP with the cursor and
press Enter. Use DEL to delete a character, and INS to Insert a
character space.
To change the Alpha Mod. text, dial the Parameter wheel until
the cursor jumps to the Alpha Mod. line.
The Delete page
Dial the Value wheel to select the Preset you want deleted, and
press Enter to delete.
NOTE: The FireworX will automatically default to the Store
page if you leave the Store display in the Delete page.
Free space indicator
The Free space indicator tells you how much room is left in the
FireworX internal RAM bank. The FireworX can hold a
maximum of 200 User Presets, however the actual number
depends on the size of your Presets, and may be less than 200.
This is due to the dynamic Preset memory structure of the
FireworX.
Warning: All data of a deleted Preset will be lost.