TC Electronic FireworX - Manual (Page 47)

45
SYSTEM & MIDI I/O Setup
FireworX control
Main Vol.-
Controls the main output volume of the
FireworX. Press the Enter key and move the
External controller for auto detection.
Tempo - Use this parameter to tap the global tempo via
MIDI or the FireworX pedal input. Press the
Enter key and move the External controller for
auto detection.
Bypass - Controls the overall bypass of the FireworX.
Press the Enter key and move the External
controller for auto detection.
Modifier input/output
Alpha -
The Alpha Mod. wheel can be used as a realtime
expression wheel. The parameters controlled by
the Alpha Mod. is set up in the Modifier Matrix.
The controller set up as to control the Alpha
Mod. externally is also used for transmitting the
Alpha Mod. movements. This makes it possible
to record the modulations of the Alpha Mod.
Ext. 1-8 - These eight inputs can control numerous
parameters in the algorithms. Their functions are
set up in the Modifier Matrix page. Press the
Enter key and move the External controller for
auto detection.
Effect Bypass
The twelve block bypass functions can be externally controlled
via these inputs, meaning that you can bypass each of the twelve
effects independently. Press the Enter key and move the External
controller for auto detection.
The controllers set up to external control of the Effect bypass
keys are also used to trans mit the on/off status of the current
blocks at Preset change or at direct key strokes.