Rainbow Electronics MAX3107 User Manual

Max3107 spi/i, C uart with 128-word fifos and internal oscillator, General description

Advertising
background image

_______________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

MAX3107

SPI/I

2

C UART with 128-Word FIFOs

and Internal Oscillator

19-5014; Rev 0; 10/09

+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.

Functional Diagram appears at end of data sheet.

General Description

The MAX3107 is an advanced universal asynchronous
receiver-transmitter (UART) with 128 words each of
receive and transmit first-in/first-out (FIFO) that can be
controlled through I

2

C or high-speed SPI™. An internal

oscillator reduces the need for an external crystal or
clock source. The 2x and 4x rate modes allow a maxi-
mum of 24Mbps data rates. A phase-locked loop (PLL),
prescaler, and fractional baud-rate generator allow for
high-resolution baud-rate programming and minimize
the dependency of baud rate on reference clock fre-
quency.
Autosleep and shutdown modes help reduce power
consumption during periods of inactivity. A low 640µA
(typ) supply current and tiny 24-pin TQFN (3.5mm x
3.5mm) package make the MAX3107 ideal for low-power
portable devices.
Integrated logic-level translation on the controller and
transceiver (RX/TX and RTS/CTS) interfaces enable use
with a wide selection of RS-232/RS-485 transceivers.
Automatic hardware and software flow control with
selectable FIFO interrupt triggering offloads low-level
activity from the host controller. Automatic half-duplex
transceiver control with programmable setup and hold
times allow the MAX3107 to be used in high-speed appli-
cations, for example Profibus-DP.
The MAX3107 is ideal for use in portable devices,
industrial applications, and automotive applications. The
MAX3107 is available in a 24-pin SSOP package and a
24-pin TQFN package. It is specified over the -40NC to
+85NC extended ambient temperature range.

Applications

Portable Devices
Industrial Control Systems
Fieldbus Networks
Automotive Infotainment Systems
Medical Systems
Point-of-Sale Systems
HVAC or Building Control

Features

S

Tiny 24-Pin, Lead-Free TQFN (3.5mm x 3.5mm)
and 24-Pin, Lead-Free SSOP Packages

S

Integrated Internal Oscillator

S

24Mbps (max) Data Rate

S

Integrated PLL and Divider

S

Fractional Baud-Rate Generator

S

SPI Up to 26MHz Clock Rate

S

Autotransceiver Direction Control

S

Half-Duplex Echo Suppression

S

Automatic RTS/CTS and XON/XOFF Flow Control

S

Special Character Detection

S

GPIO-Based Character Detection

S

9-Bit Multidrop-Mode Data Filtering

S

SIR- and MIR-Compliant IrDA Encoder/Decoder

S

+2.35V to +3.6V Supply Range

S

Logic-Level Translation on the Controller and
Transceiver Interfaces (Down to 1.7V)

S

Four Flexible GPIOs

S

Line Noise Indication

S

Shutdown and Autosleep Modes

S

Low 640µA (typ) Supply Current at 1Mbaud and
20MHz Clock

S

Low 20µA (typ) Shutdown Power

Ordering Information

SPI is a trademark of Motorola, Inc.

PART

TEMP RANGE

PIN-PACKAGE

MAX3107EAG+

-40NC to +85NC

24 SSOP

MAX3107ETG+

-40NC to +85NC

24 TQFN-EP*

Advertising