Rainbow Electronics MAX1386 - Manual (Page 7)

MAX1385/MAX1386
Dual RF LDMOS Bias Controllers
with I 2 C/SPI Interface
_______________________________________________________________________________________ 7
I 2 C SLOW-/FAST-MODE TIMING CHARACTERISTICS (Note 12, see Figure 1)
(GATEV DD = +5.5V for MAX1385, GATEV DD = +11V for MAX1386, AV DD = +5V, DV DD = 2.7V to 5.25V, external V REFADC = +2.5V,
external V REFDAC = +2.5V, C REF = 0.1µF, T A = -40°C to +85°C, unless otherwise noted).
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Serial-Clock Frequency f SCL 0 400 kHz
Bus Free Time Between STOP
and START Condition
t
BUF
1.3 µs
Hold Time Repeated START
Condition
t HD;STA
After this period, the first clock pulse is
generated
0.6 µs
SCL Pulse-Width Low t LOW 1.3 µs
SCL Pulse-Width High t HIGH 0.6 µs
Setup Time Repeated START
Condition
t SU;STA 0.6 µs
Data Hold Time t HD;DAT (Note 13) 0 0.9 µs
Data Setup Time t SU;DAT 100 ns
Rise Time of Both SDA and SCL
Signals, Receiving
t R (Note 14) 0 300 ns
Fall Time of Both SDA and SCL
Signals, Receiving
t F (Note 14) 0 300 ns
Fall Time of SDA Signal,
Transmitting
t F (Notes 14, 15)
20 +
0.1C b
250 ns
Setup Time for STOP Condition t SU;STO 0.6 µs
Capacitive Load for Each Bus
Line
C b 400 pF
Pulse Width of Spikes
Suppressed by the Input Filter
t SP (Note 16) 0 50 ns