PowerWalker ViewPower PowerWalker User Manual
Page 32
31
5.1.7.
Log Setting
Users can set up “Record Interval”, “The max. Numbers of logs for historical data”, and
“The max. Numbers of logs for historical events” according to real situation.
The setting range for “Record internal” is 30~600 seconds. It will effect history data
displayed under View –> History.
The setting range for “The max. Numbers of logs for historical data” is
100000~100000000. It will effect displayed data under View –> History.
The setting rang for “The max. Numbers of logs for historical events” is
100000~100000000. It will effect displayed data under View -> Event log.
Step 1
Select ViewPower configuration>>Log setting. Refer to Diagram 5-9.
Diagram 5-9
Step 2
Enter data in the screen.
Step 3
Click “Apply” button to save all data.
Step 4
Click “Default” button to recover the default setting.
5.1.8.
ModBus Communication Setting
It will display all connected PCs through ModBus.
Step 1
Select ViewPower configuration>>
ModBus Communication Setting
Refer to Diagram 5-10.