PowerWalker ViewPower PowerWalker User Manual
Page 41
40
Diagram 5-15
NOTE: This screen may be different for different types of UPSs.
Step 2
Choose real-time control function by clicking “Start” button on each function
section.
You can real-time control the UPS by executing following operation:
Alarm control: Click “On” to turn on the UPS alarm and “Off” to turn off the UPS
alarm immediately.
UPS turn On/Off: Click “On” to turn on the UPS and “Off” to turn off the UPS
immediately.
Battery Self-Test: Software offers three types of battery self-test: 10-second
self-test, deep discharge test, and self-defined self-test. Simply clicking “Start”
button from each type. It will execute the self-test immediately.
Outlet Control: It will cut off P1 outlets when setting time arrives. When
entering 0 in timer column and click “Start” button, it will cut off outlets
immediately when UPS works in battery mode.
5.3.2.
Scheduled On/Off
Scheduled UPS on/off can be executed once, daily, weekly. In the window “Scheduled
On/Off Setting”, users can choose time parameters. It is recommended to set only one