PowerWalker ViewPower PowerWalker User Manual
Page 34
33
remote shut down PCs which are powered by monitored UPS.
Step 1
Select UPS Setting >> Local Shutdown or click shortcut icon
. Refer to
Diagram 5-11.
Diagram 5-11
NOTE: This screen may be different for different types of UPSs.
Step 2
Select shutdown conditions and power-off options, set delay time to shutdown
system.
Step 3
Enter time for pop-up dialog before shutdown and warning interval in Warning
Dialog Setting area.
Step 4
Click “Apply” button to save all data.
NOTE:
Click “Default” button to recover the default setting.
Conditions:
When the UPS is running from battery, shut down local system after xx min xx
sec: When clicking the checkbox, local PC will start to shut down after monitored
UPS works on battery mode for xx min xx sec time. The maximum setting
number for minutes is 999, and for seconds is 59.