PowerWalker ViewPower PowerWalker - Manual (Page 38)

37
Diagram 5-13
NOTE: This screen may be different for different types of UPSs.
Step 2 Select the functions by clicking “Enable” or “Disable” button. Or change the
numbers by clicking up-down arrows or modify the numbers directly in the
number column.
Step 3 Click “Apply” button to save the settings. Each function setting is saved by
clicking each “Apply” button.
NOTE1: Any functions which are not supported by UPS will not be able to access.
NOTE2: Click “Default” button to recover the default setting.
UPS alarm: If enabled, UPS alarm will be activated. Vice versa.
Alarm at bypass mode: If enabled, UPS alarms when it’s working at bypass
mode. Vice versa.
Alarm at battery mode: If disabled, UPS will not alarm when it’s working at
battery mode. Vice versa.
Auto reboot: If enabled, UPS will auto recover when AC is recovering. Vice
versa.
Bypass when UPS is off: If enabled, AC will directly provide power to connected