SENA PS400 - Manual (Page 28)

28
---------------------------------------------------------------------------
Serial configuration --> port #1
---------------------------------------------------------------------------
Select menu
1. Host mode configuration
2. UART Configuration
3. Cryptography Configuration
4. Option
<ESC> Back, <ENTER> Refresh
----->
Figure 4-2. Initial screen for each serial port configuration
Table 4-1. Hierarchical view of the Serial Port Configuration menu items
Host Mode
TCP Server
Local Port
Host Mode
Destination IP/Port
Enable/Disable
TCP Client
Cyclic
Connection
Interval
Host Mode
Local Port
Destination IP/Port
Enable/Disable
TCP Server/Client
Cyclic
Connection
Interval
Host Mode
Local Port
UDP Tunneling
Destination IP/Port
Host Mode
UDP Server
Local Port
Host mode
Modem Emulation Host Mode
Type
Baud rate
1200/2400/4800/9600
19200/38400/57600/115200
Data bits 7/8
Parity None/Even/Odd
Stop bits 1/2
Flow control None, Hardware (RTS/CTS)
Always HIGH
Always LOW
DTR behavior
Show TCP connection
None
Open/Close TCP connection
RS232
DSR behavior
Accept TCP connection only by HIGH
RS485 echo TYPE, Baud rate, Data bits, Parity, Stop bits
RS485 non-echo TYPE, Baud rate, Data bits, Parity, Stop bits
UART
RS422 TYPE, Baud rate, Data bits, Parity, Stop bits
None Method
Method
Cryptography
3DES
Key string
Inactivity timeout
Options
Inter-character timeout