SENA Parani-BCD110-210 - Manual (Page 49)

49
0,255,0,0
B.3.10. AT+MLIST?

Response  CURRENT MODE:SINGLE CONNECTION MODE
 OK
Purpose Display the current multiple connection mode and connected slave’s Bluetooth addresses.
Description Display current mode(SINGLE CONNECTION MODE , MULTI-DROP MODE, NODE
SWITCHING MODE) and connected slave Bluetooth address.
Example AT+MLIST?
CURRENT MODE: MULTI-DROP MODE
TASK1 – 000195000001
TASK2 – DISCONNECT
TASK3 – DISCONNECT
TASK4 – 000195000004
B.3.11. AT+BTMODE,n

Response  OK
Purpose Set operation mode
Parameters n=0: MODE0 (Default)
n=1: MODE1
n=2: MODE2
n=3: MODE3
Description When the operation status is ‘Pending’ currently, change the status to ‘Standby’ with
AT+BTCANCEL prior to this command.
To take effect the ATZ must be executed or Powercycle the unit
Example AT+BTMODE,2
 OK
ATZ
B.3.12. AT+MULTI,n

Response (n = 0)
 OK
(n = 1 or n = 2)
 TASK1 OK
TASK2 OK

TASK3 OK 
TASK4 OK 
Purpose Set multiple connection mode
Parameters n=0: Single Connection Mode (Default)
n=1: Multi-Drop Mode
n=2: Node Switching Mode
Description Set single connection mode, multi-drop mode or node switching mode.
B.3.13. +++

Response  OK
Purpose Convert the operation status of ‘Connect’ to ‘Standby’