SENA Parani-BCD110-210 - Manual (Page 51)

51
B.3.18. AT+BTSCAN,n,to

Response  OK
 CONNECT 112233445566
or
 OK
 ERROR
Purpose Wait for inquiry and connection from other Bluetooth devices for a given duration
Parameters n=1: Allows Inquiry scan
n=2: Allows Page scan
n=3: Allows both of Inquiry scan and Page scan
to= Time duration in seconds
Description For the given to, Parani-BCDx10 is waiting for the inquiry and connection from other
Bluetooth devices. If parameter is set to 0, it will wait forever.
When connection is made with other Bluetooth device, response will be ‘CONNECT’ with
its BD address. If there is no connection made within this time duration, response is
‘ERROR’ and the operation status becomes to ‘Standby’.
Example AT+BTSCAN,2,30
B.3.19. AT+BTSCAN112233445566,to

Response  OK
 CONNECT 112233445566
or
 OK
 ERROR
Purpose Wait for connection by the Bluetooth device with given BD address
Parameters 112233445566=BD address
to= time duration in seconds
Description Parani-BCDx10 will wait to be connected to by the Bluetooth device with the given BD
address. If parameter is set to 0, it will wait forever.
When connection is made with the Bluetooth device, response will be ‘CONNECT’ with its
BD address. If there is no connection made within this time duration, response is ‘ERROR’
and the operation status becomes to ‘Standby’.
Example AT+BTSCAN000B530011FF,30
B.3.20. ATD

Response  OK
 CONNECT 112233445566
or
 OK
 ERROR
Purpose Connect to the last connected Bluetooth device
Description Parani-BCDx10 saves the BD address of the Bluetooth device most recently connected to.
If it fails to make a connection, response will display an ‘ERROR’.
B.3.21. ATD112233445566

Response  OK
 CONNECT 112233445566
or