GE Industrial Solutions Entellisys System Test Kit User Manual
Page 27
Advertising
System Test Kit
28
Test results
Prior to a test the “Test Results” button will be grayed out.
After a test is performed, the “Test Results” button will display. Once pressed, the following is
displayed:
Figure 1-14 Overcurrent Protection Test Results
Fault Time
The time Fault levels will be injected. Operator selectable.
Post-Fault Time
The time duration Post-Fault levels will be injected. Operator selectable.
User-Defined Test Settings
Displays the currents and voltages that will be injected, calculated from the
operator's selections (for the Fault Level currently displayed).
Table 1-6 Test setup field description
Advertising