GE Industrial Solutions MicroVersaTrip Plus and MicroVersaTrip PM DS-206, DSL-206,DS-416, DSL-416, DS-420, DS-632 User Manual
Page 2
2
TABLE OF CONTENTS
Page
SECTION 1
GENERAL INFORMATION………………………………………………………….... 3
SECTION 2
PRIOR TO INSTALLATION…………………………………………………………… 3
SECTION 3
BREAKER PREPARATION………………………………………………………… 4-6
Trip Device Removal……………………………………………………………….… 4-5
Trip Actuator Disassembly…………………………………………………………..… 6
SECTION 4
INSTALLING THE CONVERSION KIT………..……………………………….… 7-13
Installing the Phase Sensors (CT’s)……………………………………………..…… 7
Flux Shifter Assembly, Adjustment and Installation……………………………... 8-9
Wire Harness Connector Assembly and Installation…………………………... 10-11
Programmer Bracket Installation…………………………………………………..… 12
Wire Harness Installation…………………………………………………………. 12-13
SECTION 5
INSTALLING THE PROGRAMMABLE TRIP UNIT………………………………. 13
SECTION 6
FOUR-WIRE GROUND FAULT OPTION………………………………………. 14-16
SECTION 7
TESTING AND TROUBLESHOOTING………………………………………….17-19
Cabling
Diagram……………………………………………………………………....
19