GE Industrial Solutions 40A Digital MegaDLynx - Manual

GE
Data Sheet
April 24, 2013 ©2012 General Electric Company. All rights reserved.
40A Digital MegaDLynx TM : Non-Isolated DC-DC Power Modules
4.5Vdc –14.4Vdc input; 0.45Vdc to 2.0Vdc output; 40A Output Current
Features
 Compliant to RoHS EU Directive 2011/65/EU (Z versions)
 Compliant to IPC-9592 (September 2008), Category 2, ClassII
 Compatible in a Pb-free or SnPb reflow environment (Z
versions)
 Wide Input voltage range (4.5Vdc-14.4Vdc)
 Output voltage programmable from 0.6Vdc to 2.0Vdc via
external resistor. Digitally adjustable down to 0.45Vdc
 Digital interface through the PMBus TM # protocol
 Tunable Loop TM to optimize dynamic output voltage
response
 Power Good signal
 Fixed switching frequency with capability of external
synchronization
 Output overcurrent protection (non-latching)
 Over temperature protection
 Remote On/Off
 Ability to sink and source current
 Cost efficient open frame design
 Small size: 33.02 mm x 13.46 mm x 10.9 mm
(1.3 in x 0.53 in x 0.429 in)
 Wide operating temperature range [-40°C to 105°C]
 Ruggedized (-D) version able to withstand high levels of
shock and vibration
 UL* 60950-1 2 nd Ed. Recognized, CSA † C22.2 No. 60950-1-
07 Certified, and VDE ‡ (EN60950-1 2 nd Ed.) Licensed
 ISO** 9001 and ISO 14001 certified manufacturing facilities
Applications
 Industrial equipment
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
Description
The 40A Digital Mega DLynx TM power modules are non-isolated dc-dc converters that can deliver up to 40A of output current.
These modules operate over a wide range of input voltage (V
IN
= 4.5Vdc-14.4Vdc) and provide a precisely regulated output voltage
from 0.45Vdc to 2.0Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using the
PMBus protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus interface
supports a range of commands to both control and monitor the module. The module also includes the Tunable Loop
TM feature that
allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance
leading to savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
# The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
TRIM
VOUT
VS+
GND
RTUNE
CTUNE
RTrim
VIN
Co Cin
Vout+ Vin+
ON/OFF
SEQ
MODULE
PGOOD
SMBALRT#
SIG_GND
ADDR1
RADDR0
CLK
DATA
ADDR0
VS-
RADDR1
GND
SYNC
SHARE
RoHS Compliant