GE Industrial Solutions AF-300 P11_G11 Metasys N2 - Manual (Page 2)

USER MANUAL
Revision 1.01
2000-11-06
HMS INDUSTRIAL NETWORKS AB 2
Revision Notes
Date: Document: Notes:
00.01.03
00.01.10
00.01.21
00.02.01
00.05.015
00.05.19
00.08.02
00.11.06
Revision 0.10
Revision 0.11
Revision 0.12
Revision 0.13
Revision 0.90
Revision 0.91
Revision 1.00
Revision 1.01
Created by Jonas Åkerlund (JAK)
Added Point list (JAK)
Updated Table 1 with terminal block pins (JAK)
Update of 6.3, indication LED´s
Update of 6.1, 6.3 (DSUB connection,picture added),
Update Table2
Document released
Added section 6.2.4
Preface
The data and illustrations found in this document are not binding. We reserve the right to modify our products
in line with our policy of continuous product development. The information in this appendix is subject to change
without notice and should not be considered as a commitment by HMS I NDUSTRIAL N ETWORKS AB.
HMS I
NDUSTRIAL
N
ETWORKS
AB assumes no responsibility for any errors that may appear in this document.
The product and technology described in this document is patent pending in the following countries:
USA, Canada, Japan, Belgium, Denmark, Finland, France, Greece, Ireland, Italy, Luxemburg, Monaco,
Netherlands, Portugal, Switzerland, Liechtenstein, Spain, United Kingdom, Sweden, Germany and Austria.
A NY B US
 is a registered trademark of HMS I NDUSTRIAL N ETWORKS AB.
All other trademarks are the property of their respective holders.
Related documents
Document Author
FRENIC5000G11S/P11S INSTRUCTION MANUAL,
INR-Si47-0554-E
Fuji Electric