Applicable inverters – GE Industrial Solutions AF-300 P11_G11 Metasys N2 User Manual
Page 4
USER MANUAL
Revision 1.01
2000-11-06
HMS INDUSTRIAL NETWORKS AB
4
1. Applicable inverters
Item
Description
Inverter type
FRENIC5000G11S/P11S (AF-300G11/P11)
Compatible Inverter
Model number
(GE Fuji version)
The last two digits of the model number should be B1 or later
Example: 6KG1123X1B1
Minimum inverter
ROM version
number
up to 22 kW(30HP)
EN version
S08000 and after
(It is impossible to use version prior
to S08000 inverter.)
Japanese standard, JE
and CN version
Cannot be used
UX and GE Fuji version
S08000 and after
(It is impossible to use version prior
to S08200 inverter.)
30 kW(40HP) and
above
EN, Japanese standard,
JN, JE, AN, CN, UX
and GE Fuji version
H07602 and after
(It is impossible to use versions of
H00000 to H07601.)
NOTE:
This product can only be used for Inverters with ROM version numbers greater than or equal to
the versions shown above.
And in the case of installing this option in the G11/P11 inverter that is a Japanese standard, JN,
JE or CN version, please contact Fuji Electric or its distributors.
Check the ROM number of your Inverter as follows using the inverter keypad.
a. Check that the Inverter Operation monitor (Operation mode) screen is displayed.
b. Press the [PRG] key of the Inverter once.
c. Select the "5. MAINTENANC" with the cursor and press the [FUNC/DATA] key.
d. Press the down cursor key to increment the display at the MAINTENANC screen.
Finally, the ROM number is shown in the maintenance information, as indicated by
the display "INV=Hxxxxx or Sxxxxx".
The maintenance and inspection items are similar to the Inverter unit, for detail refer to the Inverter
Instruction Manual.