Asus Pundit-PH3 - Manual (Page 39)

2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3
2.11 Installing the foot stands
You need to install the foot stands to place the system vertically on your
desktop.
To install the foot stands:
1. Lay the system on its side on a
flat, stable, and elevated surface,
then locate two screw holes on
the left side of the system.
2. Extend the left side of the system
at least 3 cm from the edge of
surface to facilitate installation.
3. Position the foot stand on the
side of the chassis until their
screw holes align.
4. Drive in a screw to secure the
footstand to the chassis.
5. Follow the same procedures when
installing the second foot stand.
The photo on the right shows the
Pundit-PH3 system in a vertical
desktop placement.