Asus Pundit-PH3 - Manual (Page 80)

5 - 2 0 5 - 2 0 5 - 2 0 5 - 2 0 5 - 2 0 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled]
Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.
Configuration options: [Disabled] [Enabled]
OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto]
Allows you to set the PCI slot number holding a PCI IDE card that requires
you to set the slot number. Configuration options: [Auto] [PCI Slot1]
[PCI Slot2] [PCI Slot3] [PCI Slot4] [PCI Slot5] [PCI Slot6]
IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
5.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM) and Advanced Configuration and Power Interface
(ACPI). Select an item then press <Enter> to display the configuration
options.
5.5.1 5.5.1 5.5.1 5.5.1 5.5.1 Suspend Mode [Auto] Suspend Mode [Auto] Suspend Mode [Auto] Suspend Mode [Auto] Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
5.5.2 5.5.2 5.5.2 5.5.2 5.5.2 Repost Video on S3 Resume [No] Repost Video on S3 Resume [No] Repost Video on S3 Resume [No] Repost Video on S3 Resume [No] Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS post on S3/STR resume.
Configuration options: [No] [Yes]
5.5.3 5.5.3 5.5.3 5.5.3 5.5.3 ACPI 2.0 Support [No] ACPI 2.0 Support [No] ACPI 2.0 Support [No] ACPI 2.0 Support [No] ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [No]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.