Asus Pundit-PH3 - Manual (Page 85)

5 - 2 5 5 - 2 5 5 - 2 5 5 - 2 5 5 - 2 5 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3 A S U S P u n d i t - P H 3
5.6.2 5.6.2 5.6.2 5.6.2 5.6.2 Removable Drives Removable Drives Removable Drives Removable Drives Removable Drives
1st ~ 4th Drive [1st Floppy Drive] or [USB2.0 Card Reader] 1st ~ 4th Drive [1st Floppy Drive] or [USB2.0 Card Reader] 1st ~ 4th Drive [1st Floppy Drive] or [USB2.0 Card Reader] 1st ~ 4th Drive [1st Floppy Drive] or [USB2.0 Card Reader] 1st ~ 4th Drive [1st Floppy Drive] or [USB2.0 Card Reader]
These items specify the boot priority sequence from the available
removable drives or media. The number of drives or media that appears on
the screen depends on the number of drives or media installed on the
system. Configuration options: [xxxxx Drive] [USB2.0 Card Reader CF]
[USB2.0 Card Reader SM XD0100] [USB2.0 Card Reader MS] [Disabled]
Removable Drives
1st Drive [1st FLOPPY DRIVE]
2nd Drive [USB2.0 Card Reader]
3rd Drive [USB2.0 Card Reader]
4th Drive [USB2.0 Card Reader]
5.6.3 5.6.3 5.6.3 5.6.3 5.6.3 Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Keep Current]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo™ feature.