Asus G1-P7P55E - Manual (Page 52)

ASUS G1-P7P55E 5-3
Updating from a BIOS file
a. Select Update BIOS from a file, then click Next.
b. Locate the BIOS file from the Open window, then click Open.
3. Follow the onscreen instructions to complete the updating process.
5.1.2. ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt>.+.<F2> during POST.
• Enter the BIOS setup program. Go to the Tools menu to select EZ.Flash.
2 and press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is
found.
ASUSTek EZ Flash 2 BIOS ROM Utility V4.10
Current ROM Update ROM
A:
Note
FLASH TYPE: MXIC 25L1605A
PATH: A:\
BOARD: G1-P7P55E
VER: 0306 (H;00 B:03)
DATE: 12/04/2009
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
• Only a USB flash disk with FAT.32/16.format and single partition can
support the ASUS EZ Flash 2 utility.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!