Asus G1-P7P55E - Manual (Page 70)

ASUS G1-P7P55E 5-21
5.6.1. Boot.Device.Priority
1st.~.xxth.Boot.Device
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number
of devices installed in the system. Configuration options: [Removable Dev] [Hard
Drive] [ATAPI CD-ROM] [Disabled]
• To select the boot device suring system startup, press <F8> when ASUS
Logo appears.
• To access Windows ® OS in Safe Mode, do any of the following:
• Press <F5> when ASUS Logo appears.
• Press <F8> after POST.
5.6.2 Boot Settings Configuration
Quick.Boot.[Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full.Screen.Logo.[Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
5.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
A virtual drive (Drive
B:) may appear when you
set the CD-ROM drive as
the first boot device.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Set this item to [Enabled] to use the ASUS MyLogo2 ™ feature.
AddOn.ROM.Display.Mode.[Force.BIOS]
Sets the display mode for option ROM. Configuration options: [Force BIOS]
[Keep Current]