Asus G1-P7P55E - Manual (Page 72)

ASUS G1-P7P55E 5-23
After you have set a supervisor password, the other items appear to allow you to
change other security settings.
User.Access.Level.[Full.Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
[No.Access].- prevents user access to the Setup utility.
[View.Only].- allows access but does not allow change to any field.
[Limited].- allows changes only to selected fields, such as Date and Time.
[Full.Access].- allows viewing and changing all the fields in the Setup utility.
Change.User.Password
Select this item to set or change the user password. The User.Password item on
top of the screen shows the default Not.Installed. After you set a password, this
item shows Installed.
To set a User Password:
1. Select the Change.User.Password item and press <Enter>.
2. On the password box, key in a password containing up to six letters, or
numbers, or both, then press <Enter>.
3. Confirm the password when prompted.
The message Password.Installed appears after you set your password
successfully.
To change the user password, follow the same steps in setting a user password.
Clear.User.Password
Select this item to clear the user password.
Password.Check.[Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]