Active.processor.cores.[all, A20m.[disabled, Intel(r).speedstep(tm).tech.[enabled – Asus G1-P7P55E User Manual
Page 63: Intel(r).turbomode.tech.[enabled, Intel(r).c-state.tech.[enabled, C.state.package.limit.setting.[auto
5-14
Chapter 5: BIOS setup
Active.Processor.Cores.[All]
Allows you to choose the number of CPU cores to activate in each processor
package. Configuration options: [All] [1] [2]
A20M.[Disabled]
Setting this item to [Enabled] allows Legacy OSes to be compatible with APs.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel® CPU that supports
the Enhanced Intel
®
SpeedStep
®
Technology (EIST).
Intel(R).SpeedStep(TM).Tech.[Enabled]
When set to [Disabled], the CPU runs at its default speed. When set to [Enabled],
the CPU speed is controlled by the operating system. Configuration options:
[Disabled] [Enabled]
Intel(R).TurboMode.Tech.[Enabled]
This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo mode
allows processor cores to run faster than marked frequency in specific condition.
Configuration options: [Disabled] [Enabled]
Intel(R).C-STATE.Tech.[Enabled]
Allows you enable or disable the Intel
®
C-STATE Technology. When enabled, the
CPU idle is set to C2/C3/C4/C6. Configuration options: [Disabled] [Enabled]
C.STATE.Package.limit.setting.[Auto]
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled].
We recommend that you set this item to [Auto] for BIOS to automatically detect the
C-State mode supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]