Armasight IAIR002LP000001 DRAKOS 2 Multi-Spectral Laser Aiming/ Illumination Devices - Manual (Page 26)

26
WARNING:
The IR light from the equipment’s IR laser(s) is invisible to the naked
eye. However, the light can be detected by all night vision devices.
To reduce the risk of detection, avoid prolonged activation of the IR
laser(s).
NOTE:
To switch the activated equipment to another operation mode, turn
the switch to the desired position and reactivate the laser(s) by push-
ing ON.
3.3.3 LAD SHUT-DOWN
To shut down the LAD:
1. Turn the switch to OFF.
2. Replace the cap(s) on the laser output aperture(s).
3. Remove the equipment from the weapon rail.
4. Reinstall the safety lock screw (if removed).
WARNING:
Remember to reinstall the safety lock screw after you have completed
any high-output operation.
5. Remove the battery.
CAUTION:
Do not store the equipment with the battery still installed.
6. Store the LAD and all accessories in the carton.