English, Video output resolution – Arcam FMJ BDP100 User Manual
Page 27
e-25
english
Audio Format
Digital Output setting
HDMI out
Optical/Coax out
Dolby Digital
Bitstream HD
Dolby Digital 5.1
Dolby Digital 5.1
Bitstream Legacy
Dolby Digital 5.1
Dolby Digital 5.1
Bitstream Mixed
DTS 5.1
DTS 5.1
PCM 7.1
PCM 5.1
PCM Stereo
PCM 5.1
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
Dolby Digital Plus /
Dolby TrueHD
Bitstream HD
Dolby Digital Plus /
Dolby TrueHD
Dolby Digital 5.1
Bitstream Legacy
Dolby Digital 5.1
Dolby Digital 5.1
Bitstream Mixed
DTS 5.1
DTS 5.1
PCM 7.1
PCM 7.1
PCM Stereo
PCM 5.1
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
DTS-HD High
resolution Audio /
DTS-HD Master Audio
Bitstream HD
DTS-HD High
resolution Audio /
DTS-HD Master Audio
PCM Stereo
Bitstream Legacy
DTS 5.1
DTS 5.1
Bitstream Mixed
DTS 5.1
DTS 5.1
PCM 7.1
PCM 7.1
PCM Stereo
PCM 5.1
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
DTS
Bitstream HD
DTS 5.1
DTS 5.1
Bitstream Legacy
DTS 5.1
DTS 5.1
Bitstream Mixed
DTS 5.1
DTS 5.1
PCM 7.1
PCM 5.1
PCM Stereo
PCM 5.1
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
LPCM 7.1 (48kHz /
96kHz)
Bitstream HD
PCM 7.1
PCM Stereo
Bitstream Legacy
PCM 7.1
PCM Stereo
Bitstream Mixed
DTS 5.1
DTS 5.1
PCM 7.1
PCM 7.1
PCM Stereo
PCM 5.1
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
LPCM 5.1 192kHz
Bitstream HD
PCM Stereo
PCM Stereo
Bitstream Legacy
PCM Stereo
PCM Stereo
Bitstream Mixed
DTS 5.1
PCM Stereo
PCM 7.1
PCM Stereo
PCM Stereo
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
LPCM 2.0
(44.1kHz / 48kHz)
Bitstream HD
PCM Stereo
PCM Stereo
Bitstream Legacy
PCM Stereo
PCM Stereo
Bitstream Mixed
DTS 2.0
DTS 2.0
PCM 7.1
PCM Stereo
PCM Stereo
PCM 5.1
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
PCM Stereo
resolution setting
Video Outputs
Composite video out
Component video out
HDMI out
nTSC
PAL
nTSC
PAL
nTSC
PAL
HDMI Auto
480i
576i
1080i
1080i
Preferred
Preferred
1080p
480i
576i
1080i
1080i
1080p
1080p
1080i
480i
576i
1080i
1080i
1080i
1080i
720p
480i
576i
720p
720p
720p
720p
480p/576p
480i
576i
480p
576p
480p
576p
480i/576i
480i
576i
480i
576i
480i
576i
NOTES:
<
If the HDMI and Component video outputs are used simultaneously, the Component video
will be output at standard definition (480i/576i resolution).
<
Copy protected DVDs can only be output at standard definition over analogue video
connections (component or composite).
<
If the BDP100 is set to a resolution that your TV does not support, there may be no picture.
If this happens, connect the Composite Video output to your TV. Select the appropriate
video input on your TV to display the settings menu. Change the resolution to a value
supported by your TV then change the connections back to the desired configuration.
<
The ‘HDMI Auto’ setting uses the resolution value that the TV requests. This may not be
the best resolution. It is recommended to consult your TV documentation to discover the
best resolution setting and to set this resolution manually.
Video output Resolution
The following table shows the video output resolution
at each video output for the different resolution settings
(see “Display” on page E-21).