Quickstart – Xoro HSD 7580 User Manual
Page 60
8
Engl
ish
Quickstart
1.
Connecting to an External Power Source. Connect the power adapter (supplied with
the player) to the side input and to a wall outlet. Do not use any other device
otherwise specified by your dealer (picture 1).
2.
Move the flap of the loader to the side (picture 2).
3.
Open the protective cove. The cover opens to a maximum of a few centimeters only,
so please do not try to open it any further.
4.
Inserting a DVD disc. Align the center of the DVD disc with the center of the disc
guide. Press gently down on the DVD to snap the disc into place, then close the disc
cover.
5.
Slide the side power switch to 'ON' on the POWER buton (picture 3).
6. Press
the
PLAY button on the player face (picture 4). In general, the DVD already
inserted into the player will start reading automatically when power is turned on.
7.
The DVD player will immediately start rendering the DVD program.
8.
When you want to stop, press the STOP button. The player goes into a Pre-Stop
mode.
9.
If you want to take out the disc, press the STOP button twice. Move the loader flap
to the side and wait until the disc does not run anymore. Now you can pick up the
disc from the loader.
10.
To power off the unit, press the POWER button.
11.
If you don’t use the player for a long time, please detach the power connection from
the HSD 7580.
Picture 1