Xylem CG 842 - Manual (Page 18)

Commissioning
61
3 Commissioning
Perform the following activities for the initial commissioning:
l Set the °C or °F
l Set the resolution
l Connect the plug-in power supply (optional).
Setting °C or °F The temperature can be displayed in °C or in °F . In the de-
livery condition, the measuring instrument is preset to °C.
To change the unit proceed as follows:
1 Switch the measuring instrument off.
2 Press and hold down the <pH> key.
3 Press the <on/off> key.
4 Toggle between °C and °F by pressing < ▲ > < ▼ >.
5 Confirm with <run/enter>.
The measuring instrument switches to the measuring
mode.
1 Press and hold down the <run/enter> key.
2 Press the <pH> key. The measured values are dis-
played with a high resolution, e. g. pH = 4.012.
Setting the
resolution